Sensors
en
27
H
Sensors
Sen
sor
s
Aqua-Sensors
During the rinse cycle the Aqua sensor
checks the degree of turbidity (turbidity
is caused by dirt and detergent residue)
of the rinsing water. The duration and
the number of rinse cycles depend on
the turbidity of the water.
Load sensor/Load display
The load sensor detects the load level
in the washing machine when the door
is open. This is indicated by
a progressing bar on the display panel.
Note:
To ensure that the load sensor
measures all the laundry, the drum must
be empty before the washing machine
is switched on.
Unbalanced load detection
system
The automatic unbalanced load
detection system spins the laundry
several times to ensure even
distribution.
For reasons of safety the speed is
reduced or does not perform a spin
cycle if the washing is very unevenly
distributed.
Note:
Distribute small and large items
of washing in the drum. Faults, what to
do?