Cabinet Bonding
8.0
© 2020 Siemon
Global Headquarters
Watertown, Connecticut USA
Tel: (1) 866-548-5814
For a complete listing of our global offices visit our web site
www.siemon.com
INS_100.22796.00 W
all Mount Cabinet_B 2/20
To assist safe installations, comply with the following:
A. Use caution when installing or modifying telecommunications circuits.
B. Never touch uninsulated wire terminals unless the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
Lors de l'installation, respectez les consignes de sécuritésuivantes:
A. Utiliser avec prudence lors de l'installation ou de la modification circuits de télécommunications.
B. Ne jamais toucher les bornes de fil métallique non isolés sauf si le circuit a étédébranché.
C. Ne jamais installer cet appareil dans un endroit humide.
D. Ne jamais installer pendant un orage.
Bonding posts are present on the cabinet door (6/32 x 3/8), cabinet center section (1/4-20 x 1/2) and back plate frame (1/4-20 x 1/2) for
bonding of cabinet elements and overall cabinet bonding to ground as required by local codes (bonding hardware not included)
INS_100.22796.00_WallMT_B.qxp_A 2/18/20 8:34 AM Page 12