This manual is provided to service personnel to help prevent installation and operation of the Wall Mount Cabinet that may result in the risk of fire,
electric shock, or injury to persons. This manual provides general safety guidelines to be observed during installation and operation of the Wall Mount
Cabinet.
The Wall Mount Cabinet is intended for Indoor applications. Maximum weight load rating is 200 lb [91 kg] for equipment installation.
Two (2) trained service personnel should receive, unpack, and install the Wall Mount Cabinet. Trained service personnel should install Certified or
Listed ITE equipment in enclosures. Be sure to read and follow all individual manufacturer equipment manuals for safety and installation instructions.
Proper spacing is required when installing electrical equipment to avoid electrical shock. Only install equipment after the Wall Mount Cabinet has been
properly secured and mounted to the wall.
Trained service personnel are responsible for the requirements of a code or standard, for approving equipment, materials, and installation with the local
Authority Having Jurisdiction (AHJ).
If necessary, only qualified service personnel shall install power into enclosures. When using power distribution units (PDUs), each PDU should be
connected to a committed branch circuit that is rated for the continuous load of all the equipment connected. When not using a PDU, each piece of
equipment should be connected to a dedicated branch circuit. Enclosure must be wired per applicable sections of the National Electric Code (NEC).
If grounding is required, the installer must use appropriate grounding hardware approved by the NEC.
Legal Disclaimer:
It is recommend that only a qualified and experienced installer should install this product. Improper installation of this product could result in damage to
the product, other equipment, or personal injury. The Siemon Company cannot be held responsible for damage to equipment or personal injury
resulting from improper fastening or misuse of information presented in this manual.
The ambient temperature operating range for the Wall Mount Cabinet and accessories is 14 to +140° F (-10 to +60° C).
Unpacking Instructions:
Unpack the enclosure by carefully removing the corrugated carton and corners. Inspect for damage and report damage if there is damage before
receiving. Avoid damaging the enclosure when removing packaging.
3.0
Safety Information
Wall Mount Cabinet Product Specifications
Overall Dimension and Weight
Model (Abb.)
Width
Depth
Height
Weight
WC2-(X)101-12U
736.60 mm (29 in.)
609.60 mm (24 in.)
584.20 mm (23 in.)
36 kg (80 lb)
WC2-(X)101-18U
736.60 mm (29 in.)
609.60 mm (24 in.)
863.60 mm (34 in.)
47 kg (105 lb)
WC2-(X)101-24U
736.60 mm (29 in.)
609.60 mm (24 in.)
1117.6 mm (44 in.)
59 kg (130 lb)
WC3-(X)101-12U
736.60 mm (29 in.)
762 mm (30 in.)
584.20 mm (23 in.)
45 kg (100 lb)
WC3-(X)101-18U
736.60mm (29 in.)
762 mm (30 in.)
863.60mm (34 in.)
57 kg (125 lb)
WC3-(X)101-24U
736.60mm (29 in.)
762 mm (30 in.)
1117mm (44 in.)
68 kg (150 lb)
INS_100.22796.00_WallMT_B.qxp_A 2/18/20 8:34 AM Page 3
