Collar- Place the collar on the board, spray and press.
Fold the collar in half, spray and press.
Shirt Tail- Button the garment and place shirt tail
squarely on the Ironing Board. Press. Hang the shirt on
a hanger, or fold it. It is a good idea to let it cool before
folding. Use the Ironing Cushion to retouch any area.
Hint: Use this same procedure on other
fi
tted garments such as blouses,
fi
tted shirts,
jackets, etc.
T-shirt:
Place t-shirt
fl
at on the Ironing Board. Depending on shape, begin with the sleeves.
Note: If your t-shirt has rhinestones or an application on it, press with decorated side
face down on the board or turn it inside out.
Pleated Skirt:
Place Pressing Cushion under waistband and press. Rotate skirt until entire
waistband is pressed.
Slip the skirt over the board. Arrange the pleats. Press. Pleats may need to be
pinned to the Ironing Board Cover. Do not use plastic head pins when using the
press. Rotate skirt until all pleats are pressed.
Jacket:
Sleeves without creases- Fold the sleeve on the seam line and place the seam line
fl
at on the board. Allow the top edge of the sleeve to hang off the edge of the board.
Press.
Lapels- Place lapels
fl
at, diagonally on the Ironing Board. Press. Use Ironing
Cushion if needed.
Ties and Ribbons:
Place the tie lengthwise on the board. Press. You can also
place them horizontally on the board and close the press
them pull tie or ribbon through it.
11
