4
KEY FEATURES
A.
Power ON/OFF button
B.
Cover release button
ASSEMBLY AND USE
1) Set the UV sanitizer on a flat, level surface.
2) Plug in the unit. A solid light will indicate standby mode. The sanitizer is now ready to use.
3) Press the “cover release button” (B) to open the UV sanitizer.
4) Put the cleaned item(s) inside of the UV chamber and close the cover.
5) Press the “ON/OFF” button (A) once to power on the unit. The “ON/OFF” button (A) will
flash to indicate sanitization cycle is in use. The UV light will operate for a 30 minute cycle
and then automatically shut off.
6) When finished sanitizing, press the release button to remove your sanitized item(s) from
the UV chamber.
7) Close the cover after removing your items. The solid light will stay on to indicate standby mode.
NOTE: You can shut off the unit before 30 minutes by pressing the release button a
second time.
Summary of Contents for SUC-1708
Page 1: ...Lux UV Personal Sanitizer SUC 1708 INSTRUCTION MANUAL ...
Page 10: ...10 ...
Page 11: ...11 ...
Page 12: ...12 ...
