AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
104
Proprietary and Confidential - Contents subject to change
4118047
!SELCIOT
Set/report Cellular IoT preferences
Use this command to set Cellular IoT (CIOT) operating mode preferences on the device.
Note: The acquisition order of the selected LTE operating modes can be set using
AT
Supporting devices:
WP77xx
Password required:
No
Reset required to apply changes:
No
Persistent across power cycles:
Yes
Usage:
•
Execution:
AT!SELCIOT=<oper_mode>
Response:
OK
Purpose:
Enable/disable the LTE operating modes (based on bitmask value).
•
Query:
AT!SELCIOT?
Response:
Current Operating Mode: <oper_mode>
Supported Operating Modes:
LTE WB: 0x01
LTE M1:
0x02
LTE NB1: 0x04
OK
Purpose:
Indicate the currently enabled LTE operating modes (bitmask value).
•
Query List:
AT!SELCIOT=?
Purpose:
Display valid execution format and parameter values.
Parameters:
<oper_mode> (LTE operating modes)
•
Format: 8-bit bitmask
•
Each bit: 0=Disabled; 1=Enabled
•
Bit 0—LTE WB (Non-CIOT (M1/NB1) operation)
•
Bit 1—LTE M1
•
Bit 2—LTE NB1
Table 3-2: Modem Status Command Details (Continued)
Command
Description
