Rev.
6
Oct.18
Proprietary and Confidential - Contents subject to change
153
!STKN (notification)
Response to mobile-originated Call or SMS control request
(notification)
Unsolicited notification indicating the result of a mobile-originated call control or SMS control
request.
No host response is required to this notification.
Supporting devices:
WP76xx/WP77xx. Not supported by WP8548/WP75xx.
Notification format:
+STKN: <cmdId>, <data>
Parameters:
<cmdId> (Notification type)
•
Hexadecimal ID as ASCII string (without quotation marks):
•
"D4"—Response to mobile-originating Call Control request
•
"D5"—Response to mobile-originating SMS Control request
<data> (Notification content)
•
Content format depends on <cmdId> type:
•
If <cmdId>="D4", then <data> format depends on call type:
For Voice:
<result>, <repeatind>, <alphaId>, 0, <TON>, <NPI>, <address>, <subaddress>,
<ccp1>, <ccp2>
For SS:
<result>, <repeatind>, <alphaId>, 1, <TON>, <NPI>, <address>
For USSD:
<result>, <repeatInd>, <alphaId>, 2, <dcs>, <ussd>
For PDP context:
<result>, <repeatind>, <alphaId>, 3, <pdp>
None:
<result>, <repeatind>, <alphaId>, 4
•
<result> (Call control result)
•
0—Allowed with no modifications
•
1—Not allowed
•
2—Allowed with modifications
•
<repeatind> (BC repeat indicator)
•
1—Alternate mode
•
3—Sequential mode
•
<alphaId> (Alpha identifier)
•
Hex string
•
<TON> (Type of number)
•
0—Unknown
•
1—International
•
2—National
•
3—Network specific
(Continued on next page)
Table 4-2: SIM Toolkit Command Details (Continued)
Command
Description
