Rev.
6
Oct.18
Proprietary and Confidential - Contents subject to change
167
!DAGGAVGRSSI
Return averaged RSSI value in dBm (GSM only)
Return an averaged RSSI (Received Signal Strength Indicator) value in dBm.
Requirements:
Before this command can be used:
•
to enter FTM mode.
•
to set the device to a GSM band.
Password required:
Yes
Usage:
•
Execution:
AT!DAGGAVGRSSI=<channel>, <LNA Index>
Response:
OK
Purpose:
Return the averaged RSSI for the specified channel and LNA offset
index.
Parameters:
<channel> (Channel number for the band specified using
)
•
Valid values depend on the selected band
<LNA Index> (LNA offset index)
•
0=R0 (highest gain)
•
1=R1
•
2=R2
•
3=R3 (lowest gain)
!DAGSRXBURST
Set GSM receiver to burst mode (GSM only)
Set the receiver to start or stop sending bursts. (The receiver must be in burst mode to
read the RSSI.
Requirements:
Before this command can be used:
•
to enter FTM mode.
•
to set the device to a GSM band.
•
to set the uplink channel for the selected band.
Password required:
Yes
Usage:
•
Execution:
AT!DAGSRXBURST=<function>
Response:
<function>
OK
Purpose:
Set the receiver to burst mode
Parameters:
<function>
•
0=Get RSSI (Burst mode)
•
2=Stop continuous Rx
Table 6-2: Test Command Details (Continued)
Command
Description
