AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
178
Proprietary and Confidential - Contents subject to change
4118047
!DASTXON
Turn Tx PA on
Turn the transceiver PA on. The PA remains on until you turn it off using
, or
until you reset or power the modem down and up.
Requirements:
•
to enter FTM mode.
•
to set the band.
•
to set the uplink channel for the selected band.
Password required:
Yes (see
for details)
Reset required to apply changes:
No
Persistent across power cycles:
No
Usage:
•
Execution:
AT!DASTXON
Response:
OK
Purpose:
Turn the Tx PA on.
Parameters:
None
!DAWGAVGAGC
Return averaged Rx AGC value (WCDMA only)
Return the averaged AGC (Automatic Gain Control) reading for a specific band for either
the main path or diversity path (if applicable).
Requirements:
•
to enter FTM mode.
•
to set the device to a WCDMA band.
Password required:
Yes (see
for details)
Usage:
•
Execution:
AT!DAWGAVGAGC=<channel>, <LNA Index>[, <path>]
Response:
<agc>
OK
Purpose:
Return the averaged AGC for <channel> on the main path or diversity
path.
Parameters:
<channel> (Uplink channel number (UARFCN) for the band specified using
)
•
Valid values depend on the selected band
<LNA Index> (LNA offset index)
•
0=R0 (Highest gain)
•
1=R1
•
2=R2
•
3=R3 (Lowest gain)
<path> (For modules supporting diversity)
•
0=Main path
•
1=Diversity path
<agc> (Averaged Rx AGC in dBm)
•
Example: -78.9
Table 6-2: Test Command Details (Continued)
Command
Description
