Rev.
6
Oct.18
Proprietary and Confidential - Contents subject to change
189
Command reference
Table 8-2: GPS Command Details
Command
Description
!GNSSCONFIG
Configure GNSS satellite constellation support
Configure GNSS engine to support various GNSS satellite systems.
Supporting devices:
WP76xx/WP77xx. Not supported by WP8548/WP75xx.
Password required:
No
Reset required to apply changes:
Yes
Persistent across power cycles:
Yes
Usage:
•
Execution:
AT!GNSSCONFIG=<GPS>,<GLO>,<BDS>,<GAL>
Response:
OK
Purpose:
Enable or disable satellite systems.
•
Query:
AT!GNSSCONFIG?
Response:
GPS:
<GPS>
GLONASS: <GLO>
BDS:
<BDS>
GAL:
<GAL>
OK
Purpose:
Display state of each satellite system (enabled/disabled).
•
Query List:
AT!GNSSCONFIG=?
Purpose:
Return the expected command format.
Parameters:
<GPS> (GPS satellite system state)
•
1—Enable
•
Note: GPS support cannot be disabled.
<GLO> (GLONASS satellite system state)
•
0—Disable
•
1—Enable
<BDS> (Beidou satellite system state)
•
0—Disable
•
1—Enable worldwide
•
2—Enable outside US
<GAL> (Galileo satellite system state)
•
0—Disable
•
1—Enable worldwide
•
2—Enable outside U.S.
