Rev.
6
Oct.18
Proprietary and Confidential - Contents subject to change
209
!GPSXTRATIMEENABLE
Set/report GPS XTRA time settings
Enable or disable XTRA time information, and set or report specific XTRA time settings.
Password required:
Yes (see
for details)
Reset required to apply changes:
Yes
Persistent across power cycles:
Yes
Usage:
•
Execution:
AT!GPSXTRATIMEENABLE=<enable> [,<thresh>, <delay>]
Response:
OK
or
ERROR
Purpose:
Enable or disable time information. If enabled, sets the uncertainty
threshold and delay time to retry with a backup server.
•
Query:
AT!GPSXTRATIMEENABLE?
Response:
XTRA Time Info Enabled: <enable>
XTRA Time Uncertainty Threshold: <thresh>
XTRA Time Delay Threshold: <delay>
Purpose:
Return the current values of GPS XTRA time parameters.
•
Query List:
AT!GPSXTRATIMEENABLE=?
Purpose:
Return supported execution parameter values.
Parameters:
<enable> (Enable or disable XTRA time information)
•
0=Disable. To fully disable XTRA, you must also call
!GPSXTRADATAENABLE=0
to disable XTRA data information.
•
1=Reserved
•
2=Enable XTRA time information
<thresh> (XTRA time uncertainty threshold, in ms)
•
Valid range: 100–30000
<delay> (Time to delay before retrying with backup server, in ms)
•
Valid range: 100–10000
Table 8-2: GPS Command Details (Continued)
Command
Description
