AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
78
Proprietary and Confidential - Contents subject to change
4118047
!LTEINFO
Display LTE network information
Display LTE network information.
Password required:
No
Usage:
•
Query:
AT!LTEINFO?
Response:
!LTEINFO:
Serving: ...<list of applicable parameters>
IntraFreq: ...<list of applicable parameters>
InterFreq: ...<list of applicable parameters>
GSM: ...<list of applicable parameters>
WCDMA: ...<list of applicable parameters>
CDMA 1x: ...<list of applicable parameters>
CDMA HRPD: ...<list of applicable parameters>
Purpose:
Return LTE network measurements.
Parameters:
<earfcn> (E-UTRA absolute radio frequency channel number of the serving cell)
•
16-bit decimal
<mcc> (MCC code)
•
16-bit decimal
<mnc> (MNC code)
•
16-bit decimal
<tac> (Tracking area code)
•
16-bit decimal
<cid> (LTE Serving cell id)
•
16-bit hexadecimal
<bd> (Serving cell operating band)
•
8-bit decimal
<d> (Transmission bandwidth configuration of serving cell on the downlink)
•
8-bit decimal
<u> (Transmission bandwidth configuration of serving cell on the uplink)
•
8-bit decimal
<snr> (Average RSSNR of the serving cell over last measurement period in decibels)
•
8-bit decimal
<pci> (Physical cell ID)
•
16-bit decimal
<rsrq> (Current Reference Signal Receive Quality as measured by L1)
•
16-bit decimal
<rsrp> (Current Reference Signal Receive Power in dBm x10 as measured by L1)
•
16-bit decimal
<rssi> (Current Received Signal Strength Indication as measured by L1)
•
16-bit decimal
(Continued on next page)
Table 3-2: Modem Status Command Details (Continued)
Command
Description
