USER GUIDE
www.SierraTeck.com
RECORDABLE MOTION ACTIVATED VOICE PLAYER WITH BUILT-IN MICROPHONE
info@SierraTeck.com
5
At the top right corner of the device, there are openings that resemble a microUSB port and a
microSD card slot. Those openings are for different variations of this product and have no
function or use on this unit.
Installation Instructions
This unit is designed for indoor use only. External use will result in moisture damaging internals
of the device and void the warranty. For best performance and to avoid false triggers, do not
install in areas that have direct sunlight, areas with large temperature variation, or near air
conditioners and heaters. The induction window (area where motion can be detected) is as
illustrated below:
STEP 1: Attach to Wall
There are two methods to attach the unit to the wall,
directly
or
through included ball mount
.
Using the ball mount method allows you to adjust the detection area while the unit is in place.
The back of the unit has 3 screw holes; regardless of installation method chosen, only the
bottom 2 holes are used, the upper one is left unused
Directly to wall:
Screw 2 screws provided into wall and attach unit by the bottom 2 screw holes
OR
Using ball mount
:
Insert part #3A into bottom 2 screw holes at back of unit
o
Pongs should be pointing up when inserted and pushed up firmly into place
Screw part #3B into wall using 2 screws provided
Firmly push unit into part #3B attached to wall until the ball snaps into socket
To detach from wall, pull unit firmly to detach part #3B from part #3A
STEP 1: Adjust Sensor Angle (Optional)
This step is optional and only applicable to “ball mount” installation method described above.
Swivel/rotate unit to adjust area targeted for detection
