USER GUIDE
www.SierraTeck.com
SMARTSOUND - MOTION ACTIVATED AUDIO PLAYER
info@SierraTeck.com
6
Buttons & Description
No.
Name
Function
1
Indicator Light
1. If motion is detected, light turns on and stays on for duration of playback
2. Light will also flash when transferring audio to unit
2
Audio Interface
3.5mm audio output interface for connecting to external speakers
3
USB Port
The USB port is used for connecting the AC power supply and recharging the
internal batteries.
This port is not used for data-transfer, only for supplying
power and recharging.
4
MicroSD Slot
Insert microSD card here, used to transfer files to memory or to play directly from
microSD card
5
A Button
Dual Function:
Used to transverse audio (“Previous file”)
Used to select playback mode (see later section)
6
B Button
Dual Function:
Used to transverse audio (“Next file”)
Used to select playback mode (see later section)
7
Sensor Unit
Used for detecting motion
8
Power Switch
Turns unit on or off
9
Volume Button
Adjusts volume of built-in speakers
Installation Instructions
This unit is designed for indoor use only. External use will result in moisture damaging internals
of the device and void the warranty. For best performance and to avoid false triggers, do not
install in areas that have direct sunlight, areas with large temperature variation, or near air
conditioners and heaters. The induction window (area where motion can be detected) is as
illustrated below:
