41
GB
B
A
C
D
Fig. 9
B
B
A
D
C
B
C
A
Fig. 10
Fig. 11
2.7 ASSEMBLING THE CONNECTION DUCTING
(where supplied)
2.7.1 GLASS SHELVING DUCTING (for VAD
model)
- CONNECTING LINEAR MODULES
- Position the ducting block (Fig. 9, pos. A) inside
the aluminium contours and fix it in place using the
screws provided (Fig. 9, pos. B).
- Position the screw (Fig. 9, pos. C) and fix it in place
using the nut (Fig. 9, pos. D).
- A LINEAR MODULE AND A CORNER MODULE
- Position the ducting block (Fig. 10, pos. A) inside
the aluminium contours and fix it in place using the
screws provided (Fig. 10, pos. B).
- After this, tighten the screw (Fig. 10, pos. C).
- BETWEEN CORNER MODULES
- Position the ducting block (Fig. 11, pos. A) inside
the aluminium contours and fix it in place using the
screws provided (Fig. 11, pos. B).
- Then slot in the pin (Fig. 11, pos. D) and fix it in
place using the dowels (Fig. 11, pos. C).
B
B
C
Summary of Contents for - QUAD B-30
Page 153: ......
