26
MIG Welding
1.
Insert the earth cable plug into the Negative (-) socket and twist to tighten.
2.
Plug the MIG welding gun into MIG torch euro-connector on the front panel and tighten locking nut
securely.
3.
Connect the MIG polarity change power connection lead to the positive power socket.
4.
Connect the gas line to gas connector on the rear panel.
5.
Connect the power cord of welding machine with the outlet on electrical box.
INSTALLATION & OPERATION
2
§4.3 Installation & Operation for MIG Welding
§4.3.1 Set up installation for MIG Welding (Gas shielded wire)
(1) Insert the earth cable plug into the Negative (-) socket and twist to tighten.
(2) Plug the MIG welding gun into MIG torch euro-connector on the front panel and
tighten locking nut securely.
(3) Connect the MIG polarity change power connection lead to the positive power socket.
(4) Connect the gas line to gas connector on the rear panel.
(5) Connect the power cord of welding machine with the outlet on electrical box.