OPERATION
Lighting
1)
Open the damper control on the front of the ash drawer by sliding the brass
knob to the right.
2)
Close the sliding panel on the front door of the heater.
3)
The fire can be lit using any fire lighter or starter.
IT IS IMPORTANT NOT
TO OVERFILL THE COMBUSTION CHAMBER (pg 4)
.
4)
Once the fuel has ignited the sliding panel may be opened and the damper
control adjusted to provide extended burning. (Note : Both the knob of the
sliding door and the damper are hot and hand protection must be worn to make
any adjustment when the heater is burning)
WARNING
PROVIDE AMPLE FRESH AIR
HEATER AND EXHAUST PIPE BECOMES HOT
BURN ONLY THE INTENDED FUELS IN THIS HEATER
DO NOT BURN THE HEATER IF WINDY CONDITIONS ARE CAUSING
DOWNDRAFT
WARNING : DO NOT OPERATE UNATTENDED
5
