Your kit contains the following parts. Please check your kit for any missing or damaged parts before starting construction.
COMPLETE KIT PARTS LIST
Wood Bag:
1 LC-508-01
3/32x4x24 Laser Cut Balsa Sheet
1 LC-508-02
3/32x4x24 Laser Cut Balsa Sheet
1 LC-508-03
3/32x4x24 Laser Cut Balsa Sheet
1 LC-508-04
3/32x4x24 Laser Cut Balsa Sheet
1 LC-508-05
3/32x4x24 Laser Cut Balsa Sheet
1 LC-508-06
3/32x4x18 Laser Cut Balsa Sheet
1 LC-508-07
1/8x4x18 Laser Cut Balsa Sheet
1 LC-508-08
1/8x4x18 Laser Cut Balsa Sheet
1 LC-508-09
3mmx4x24 Laser Cut Poplar Ply Sheet 1 LC-508-10
1/16x4x5 Laser Cut Birch Ply Sheet
6 Leading Edge and Spars 1/4 sq.x24 Balsa Strip
4 Leading Edge Stringers
1/8 sq.x24 Balsa Strip
1 Wing Tips
3/4 Balsa Trianglex14
4 Trailing Edge
1/16x1x24 Balsa Sheet
4 Center Section Sheet
1/16x3x12 Balsa Sheet
1 Hatch Support & Servo Rails
1/4 sq.x12 Spruce
2 Control Surface Pushrod 1/16x18 Wire, Threaded One End
1 F-10 Braces
3/32x1/4x6 Balsa Strip
2 Ailerons
1/8x1x24 Balsa
Misc. Parts Loose in Box:
1 Plan Sheet #1
1 Plan Sheet #2
1 Instruction Book
2 Main Landing Gear 7 1/2
Hardware Bag:
2 Control Horn
Small Nylon Control Horn
4 Horn Screw
2-56x3/8 Machine Screw
1 Elevator Joiner
1/8x3 Birch Dowel
5 Main Landing Gear and Hatch Screw #2 Sheet Metal Screw
2 Nylon Clevis
Small Nylon Clevis
2 Wing Dowels
3/16x3 1/2 Dowels
1 Tail Wheel Wire
1/16 dia.x3 Music Wire
Note: If you are building your Cloud ranger with the optional ailerons, you will need to supply the control horns and pushrods.
The first thing that you need to do is to identify and mark the part numbers on the laser cut parts using the drawings on the
following pages as a guide.
It is possible that several of the laser cut parts may not be completely cut through. If this is the case you can free the part from
the sheet quickly using an X-acto knife.
NOTE: The slight discoloration on the edges of the laser cut parts may be removed by lightly sanding the edges with 400 grit
sandpaper.
Summary of Contents for Cloud Ranger HHR508
Page 2: ... ...
