SIGELEI SWALLOWTAIL 75A, User Manual

       SIGELEI SWALLOWTAIL 75A is a new product released by Sigelei. It 

supports all types of operation modes and supports all types of metal of the 

coils .It will bring you a new vaping experience and feeling. Please read the 

instruction manual carefully before use.

TECHNICAL SPECIFICATION

Size: 86 X 45 X 35mm

Display screen: 0.91”OLED

Wattage range: 10W-77W

Temperature range: 100℃-300℃/212℉-572℉

Voltage input: 3.2V-4.2V

Voltage output: 1.0V-7.5V

Maximum current: 28A

Support battery: 1*18650

Modes: POWER/SS/Ti1/Ni200/TCR/TFR

Resistance range: 0.1Ω-3.0Ω

Coil  supporting:  Stainless  steel  (304/316/317)/Titanium/Nickel  chrome 

/Ni200/TCR/TFR

Supports micro USB charger adapter: DC 5V/2.5A

OPERATING INSTRUCTION

ON/OFF

     Installing the battery,the screen will display LOGO "SIGELEI" for 2 seconds 

and then shut down.

On:Press  the  fire  button  5  times  quickly  (2  seconds)  to  enter  the  main 

interface.

Off:Under the state of turning on, press the fire button 5 times quickly (2 

seconds)to turn off the product.

WORKING MODE CHANGE

      Under the state of turning on, enter the menu by clicking the fire button 

3  times  consecutively.  It  will  show  POWER/SS/Ti1/NI200/TCR/TFR，

“POWER”represents the wattage mode. “SS” represents the stainless 

steel  coil  TC  mode.  “Ti1”  represents  Ti  coil  TC  mode.Ni200  represents 

Ni200TC  mode.“TCR”“TFR”  represents  custom  wire/dry  coil  mode. 

Press the “+” or “-” button to chose the mode. Select the mode by 

pressing the fire button.

POWER ADJUSTMENT

   Once you selecting “POWER”, the device will be in wattage mode. 

According to the "CHANGING WORKING MODES" to choose "POWER".

By pressing “+” or“-” button, the wattage will increase or decrease 

from 10.0W to 77.0W.

TEMPERATURE CONTROL MODE ADJUSTMENT 

      Once selected TC mode, the device will work at TC mode. According to 

working  mode  shift,  turn  into  the  menu  SS  (  stainless  steel  material 

304,316,317 ) or Til or Ni200 to choose the temperature unit: ℉ or ℃. Press 

the "+" or "-" button to adjust temperature. The temperature range is 212 

-572℉/100-300℃.

TCR / TFR MODE SETTING

   When "TCR" mode is selected, the user sets the coefficient of temperature 

resistance in degree Celsius according to the material of the heating coil. 

Press "+" or "-"button to set the parameters. Press the fire button to 

confirm.When  "TFR"  mode  is  selected,  the  user  sets  the  temperature 

resistance parameters of the five temperature points according to the 

material of the heating coil. Press "+" or "-"button to set the parameters, 

and press the fire button to confirm.

READING ATOMIZER RESISTANCE

     Under temperature mode, after putting the new atomizer or changing 

atomizer ,you need to press the "+"and"-" buttons together and 

choose“Read”to  check  the  resistance  of  the  atomizer.  Once  set,  the 

resistance of the atomizer will be displayed. There may be no vapor or the 

device  may  not  work  without  reading  the  resistance  (may  damage  the 

atomizer).  The  resistance  range  the  system  supports  is  from  0.1Ω–  3.0Ω. 

The  device  displays  “CHECK  ATOMIZER”  and  no  output  if  there  is  no 

atomizer or beyond resistance range.

ATTENTION: 

When you insert the atomizer or replace the atomizer, you 

must read the atomizer resistance before use, and make sure the coil is cold 

state when you read the resistance of atomizer. Otherwise the product will 

not work or make wrong judgment of the resistance of the atomizer.

PREHEAT POWER/TIME SETTING

    Press the "+" button and fire button for three seconds to turn into 

preheat interface. Press the "+" or "-" button to adjust the preheat wattage 

(adjustment range 10w~77w). Press the fire button to shift to preheat time, 

Press the "+" or "-" button to adjust the preheat time . Press the fire button 

again to exit.

ATTENTION: 

During the warm-up time the product will work in constant 

power mode for preheating,please set the reasonable parameters to 

protect the atomizer from burning.

TEMPERATURE COMPENSATION SETTING

    Under temperature control mode, press the "+","-"and fire button 

simultaneously for 3 seconds to enter the temperature compensation 

interface.  Press  "+"  or  "-"  key  to  adjust  the  compensation  temperature 

(compensation range -35 ℃ ~ 40 ℃/-95℉~104℉). Press the fire button to  

exit.

LOCKED AND UNLOCKED OF SYSTEM

      First pressing the “-”button, then pressing the fire button, the screen 

appears “Button Locked”. To unlock the system , you need to press the 

“-”and then press the fire button,the screen appearing“Button 

Unlocked”.

FACTORY RESETTING

    Pressing the "-" button, and then inserting the battery. The screen will 

prompt  "RESTORE  DEFAULTS".  Then  the  system  will  be  restored  to  the 

factory settings.

PRODUCT CHARGING 

      Use a standard micro USB cable to charge the product and use a certified 

genuine adapter. This product has an adaptive input power limit function, It 

can adjust the charging power automatically according to the input 

situation.  The  highest  current  can  be  up  to  2.5A.  The  length  of  time  to 

complete the charge depends on the capacity of charging current and the 

remaining power before charging. 

WARNING: 

For your safety, do not use this product while charging!

PRODUCT UPGRADE 

      This product can be connected to computer via micro USB data cable for 

software upgrades. For the specific method of operation, please log in the 

official website www.sigelei.com to download it.

DISPLAY HINTS

 •

  When the resistance is below 0.1Ω, it reads “Low Resistance”

 •

  Without atomizer: “CHECK ATOMIZER” 

 •

  When the atomizer shorts: “SHORT!” 

 •  Low battery power tip: The battery icon flashes
 •

  High wattage input: 

“HHHHHHHHHHHHHHHH”

 •

  High temperature protection: “Too Hot!”

TIPS

1. This product is intended for use or purchase only by persons of legal age 

or older, not for sale to minors; This product is also not suitable for 

pregnant  or  nursing  women,  persons  at  risk  of  heart  disease,  persons 

with  hypertension  and  diabetes,  or  anyone  taking  medication  for 

depression or asthma .

2. The device may include small parts. Please keep out of reach of children 

and pets.

3. Please don’t put it in excess heat or cold and humid environment 

4. Do not abuse or leave the device unattended

5. The device is sold purely for recreational purposes. It is not a smoking 

cessation device and has not been tested or approved for use as such.

6. Please adjust the wattage that your atomizer can support when you are 

using e-liquid atomizers.

7. Please use a certified standard adapter while charging device.

8. Do not dismantle, repair or modify the product.

QUALITY WARRANTY

This product warranty period is 90 days, man-made improper operation will 

not be covered within the warranty.

04

 SIGELEI SWALLOWTAIL 75A