Sight mark SM11030KSM11031KSM11032K, User Manual

ADJUSTING THE SUNSHADE

All Solitude spotting scopes are equipped with a built-in sunshade.  The built-in sunshade provides several advantages 

such as prevention of lens glare from direct sunlight and protection of the objective lens from the elements. To use the 

sunshade:

1.  First, open the lens cap (9) on the spotting scope.

2.  Pull on the sunshade (7) until it is fully extended.  

3.  To collapse the sunshade, push on the sunshade to return it to its original position.

ADJUSTING THE VIEWING ANGLE

The Sightmark Solitude 20-60x60SE and 20-60x80SE are equipped with a tripod mount collar (6).  This feature allows the 

spotting scope to be rotated 360º so the eyepiece can moved to any location such as 90º (left or right) or 180º (bottom).  

This is helpful when the spotting scope is being used in different scenarios such as on a shooting bench, shooting prone, 

or using the spotting scope on a window mount.  The 360º  rotation is designed to provide flexibility and fit your specific 

need.  To adjust the eyepiece’s angle:

1.  Loosen the thumbscrew located on the side of the tripod mounting collar.

2.  Rotate the spotting scope so the eyepiece is located at your preferred angle.

3.  Keep the spotting scope in position and tighten the thumbscrew to secure the spotting scope in position.   

10

11