SDG7000A Quick Start 27
Counter
The counter is used to measure the frequency and period of the current signal, or
to count the currently specified trigger events. Click counter in the toolbar in the
Home Page to enter corresponding settings. The counter has two working modes:
Frequency meter and Totalizer.
When the mode is "Frequency", the parameters measured by the frequency
meter (Frequency, Period or Duty Cycle) are displayed here. When the mode
is " Totalizer ", the Totalizer is displayed.
Current parameter measurement.
The small font on the right shows the
deviation between the measured value and the reference value entered at
, expressed in parts per million (ppm).
Parameter measurement statistics display area
Working mode selection
Counter settings
Display parameter setting:
Parameters that can be displayed include
Frequency, Period or Duty Cycle.
Reference frequency setting:
Input the desired input frequency here, and
the frequency meter will automatically calculate the deviation between the
measured value and the reference frequency.
Clear statistics
Summary of Contents for SDG7000A Series
Page 1: ...SDG7000A Arbitrary Waveform Generator EN01A Quick Start...
Page 2: ......
