139
Appendix C: Daily Maintain and Cleaning
Daily Maintain
DO not store or leave the instrument in where the LCD display will be exposed
to direct sunlight for long periods of time.
CAUTION: To avoid damage to the instrument or probes, do not expose them to
sprays, liquids, or solvents
Cleaning
If this instrument requires cleaning, disconnect it from all power sources and
clean it with a mild detergent and water. Make sure the instrument is completely dry
before reconnecting it to a power source.
To clean the exterior surface, perform the following steps:
1). Remove loose dust on the outside of the instrument and probes with a lint-free
cloth. Use care to avoid scratching the clear plastic display filter.
2).
Use a soft cloth dampened with water to clean the instrument. Use an aqueous
solution of 75% isopropyl alcohol for more efficient cleaning.
Note
：
To avoid damage to the surface of the instrument or probes, do not use any
abrasive or chemical cleaning agents.
Summary of Contents for SDS1000 Series
Page 146: ...138 Coupling DC...
