37
2.7 Horizontal System
As follow Picture, there are one button and two knobs in the HORIZONTAL area.
Picture 2.7-1
Table 2- 12 SDS1000C/CE/CF Series Horizontal system function menu
：
SDS1000CM Series Horizontal system function menu:
Option Setting
Description
Delayed On
Off
Turn on this function that main timebase
waveform display on the top half screen
and window timebase wavefrom display on
the below half screen at the same time.
Turn off this function that only display
main timebase waveform on the screen.
MemDepth Normal
Long Mem
Set memory depth to normal.
Set memory depth to long Memory depth in
order to get more waveform dots.
Notes: If Set memory depth to normal mode, the memory depth is 40Kpts
If Set memory depth to Long Mem mode, the memory depth is 2Mpts
Option
Introduction
Main
Display the waveform.
Win
Zone
Two Cursors define one window; use horizontal
“POSITION” and “S/div” to adjust the window.
Window
Change the display so that the waveform could be
displayed in the window
（
expanded to screen width).
Horizontal
“POSITION”
knob
S/div knob
Summary of Contents for SDS1000 Series
Page 146: ...138 Coupling DC...
