73
Return
Return to the first page of auto
measurement menu.
Table 2-38 Auto measure function4-Delay measure menu:
Table 2-39 All Measurement function menu:
Option Setting Instruction
Source CH1
CH2
CH3
CH4
Select input signal channel.
Voltage On
Off
Turn on the all measurement function to measure
voltage parameters.
Turn of the all measurement function to measure
voltage parameters.
Time On
Off
Turn on the all measurement function to measure
Time parameters.
Turn of the all measurement function to measure
Time parameters.
Delay On
Off
Turn on the all measurement function to measure
Delay parameters.
Turn of the all measurement function to measure
Delay parameters.
Return
Return to the “All Measure main menu”.
Table 2-40 Introduction of the Measure Type:
Option Setting
Instruction
Source
CHX-CHY
Select any two input signal source
for Delay measure.
Type
Phase
、
FRR
、
FRF
、
FFR
、
FFF
、
LRR
、
LRF
、
LFR
、
LFF
Press the “Type” button or turn the
“Universal” knob to select Delay
measure parameter.
、
、
、
、
、
、
、
、
Display the corresponding icon
and measure value of your
selected Delay measure parameter.
Return
Return to the first page of auto
measurement menu.
Measure Type
Introduction
Vmax
The most positive peak voltage measured over the
entire waveform.
Vmin
The most negative peak voltage measured over the
entire waveform.
Vpp
Measures the absolute difference between the
maximum and minimum peaks of the entire
waveform.
Vtop
Measures the highest voltage over the entire
waveform.
Vbase
Measures the lowest voltage over the entire
waveform.
Vamp
Voltage between Vhig and Vlow of a waveform.
Summary of Contents for SDS1000 Series
Page 146: ...138 Coupling DC...
