75
If you want to measure voltage parameters, please follow next steps:
1
）
. Press the “MEASURE” button to enter the “Auto measurement”
menu.
2
）
. Press the top first option button to enter the “second measurement
menu”.
3
）
. Select measure type. If you press the “Voltage” option button,
“Voltage measurement” menu will display on the screen.
4
）
. Press the “Source” option button to select “CH1” , “CH2” ,
“CH3”, “CH4”according to input signal channel.
5
）
. Press the “Type” option button to select the parameter type that
you want to measure. The corresponding icon and value will
display below the measure parameter.
Picture 2.11-7
6
）
. Press the “Return” option button to return the home page of “Auto
Measurement” menu. The selected parameter and the
corresponding value will display on the top first position of the
home page.
You can display the other parameters and its’ value on the
corresponding position using the same way, and the screen can
display five parameters at one time.
LFR
The time between the first falling edge of source
X and the last rising edge of source Y.
LFF
The time between the first falling edge of source
X and the last falling edge of source Y.
Note:X,Y represent CH1,CH2,CH3 and CH4 respectively, but X and Y can’t represent the
same signal source.
Summary of Contents for SDS1000 Series
Page 146: ...138 Coupling DC...
