86
there is a prompting message that “Recall data success” displaying on the screen),
now waveform data have been recalled from USB flash drive.
■
Save Picture
Waveform interface image can be saved to USB flash drive, but they can’t be
recalled. You can open them on correlative computer software.
Table 2-46 Picture storage function menu:
Option Setting
Introduction
Type
Pictures
Menu for the Storage/Recall waveform
interface image.
Print Picture
When the oscilloscope connect to the
printer and “Back USB” option is set
to “Printer”, select “Print Picture” and
press the “PRINT” button to print the
screen image.
Print Key
Save Picture
When the USB flash drive insert to the
USB Host interface(now the USB flash
drive open status icon displays on the
top of the screen), select “Save
picture” and press the “Save” knob to
go into the Save/Recall interface.
Save
Go to the Save/Recall interface.
Picture 2.12-11
Save waveform image to USB flash drive, follow next steps:
1). Select the screen image that you want .
2) Press the “SAVE/RECALL” button to enter “SAVE/RECALL” menu.
3). Press the “Type” option button to select “Pictures”.
4). Insert USB flash drive to USB host port of the oscilloscope and wait that the
oscilloscope has initialized USB flash drive (about five seconds).
Summary of Contents for SDS1000 Series
Page 146: ...138 Coupling DC...
