SDS2000X HD Quick Start 13
To Set Parameters
Several different ways are provided to set parameters:
Switch –
sets parameters with two states,
such as to enable or disable a function.
Touch the switch region to change from
one state to the other.
List –
sets parameters with more than two
options, such as the coupling mode of
channels. Touch the parameter region,
and then select the expected option from
the pop-up list.
Virtual Keypad –
Sets parameters with a
numerical value. Touch the parameter
region, and the parameter can be adjusted
by the universal knob on the front panel;
touch the region again, then the virtual
keypad appears;
To use the operation of setting “deskew” of
the channel as an example: If the expected
value is 65 ns, input “65” on the virtual
keypad, and then choose the unit n to
complete the operation. On the virtual
keypad, touching the button Max , Min ,
and Default quickly sets the parameter
to its maximum, minimum and default
values.
