SIG
L
ENT
SDS2000X-E User Manual
97
CAN Trigger and Serial Decode
The oscilloscope can also decode CAN signals. The following sections “
Setup for CAN
Signals
”, “
CAN Trigger
” and “
CAN Serial Decode
” provide instructions for triggering and
decoding the CAN signals.
Setup for CAN Signals
1. Press the
Decode
key to enter the
DECODE
function menu.
2. Press the
Decode
softkey and select the desired slot (Decode1 or Decode2).
3. Press
Protocol
softkey and then select
CAN
by turning
Universal Knob
.
4. Press
Signal
softkey to enter the
SIGNAL
menu as Figure 48 shows.
Figure 48 CAN SIGNAL Menu
a. Press
Source
softkey to select the channel that is connected to the CAN signal.
b. Press
Threshold
key
to set the CAN signal’s threshold voltage level by
Universal Knob
. The threshold voltage level is for decoding, and it will be regard
as the trigger voltage level when set the trigger type to serial.
5. Press the
Configure
softkey to enter the
BUS CONFIG
menu.
6. Press
Baud
to set baud rate by
Universal Knob
.
The baud rate can be set as a predefined value (from 5 kb/s to 1 Mb/s) or custom
value (from 5 kb/s to 1 Mb/s).
If the desired baud rate is not listed, press
Baud
and select
custom
option, press
the
Custom
and turn the
Universal Knob
to set the desired baud rate.
Summary of Contents for SDS2000X-E Series
