SIG
L
ENT
68
SDS2000X-E
User Manual
(line value)/8
8
The table below takes
Of Lines
as 800 as an example to explain the relation between
Of Lines
,
Of Fields
,
Interlace
,
Trigger Line
and
Trigger Field
.
Of Lines
Of Fields Interlace Trigger Line
Trigger Field
800
1
1:1
800
1
800
1,2,4 or 8 2:1
400
1, 1~2, 1~4, 1~8
800
1,2,4 or 8 4:1
200
1, 1~2, 1~4, 1~8
800
1,2,4 or 8 8:1
100
1, 1~2, 1~4, 1~8
5. Press the
Sync
softkey to select
Any
or
Select
trigger mode.
Any
: Trigger on any of the horizontal sync pulses.
Select
: Trigger on the appointed line and field you have set. Press the
Line
or
Field
softkey; then turn the
Universal Knob
to set the value.
The following table lists the line numbers per field for each video standard.
Standard
Field 1
Field 2
NTSC
1 to 262
1 to 263
PAL
1 to 312
1 to 313
HDTV 720P/50, HDTV 720P/60
1 to 750
HDTV 1080P/50, HDTV 1080P/60
1 to 1125
HDTV 1080iP/50, HDTV 1080i/60
1 to 562
1 to 563
The following are exercises to familiarize you with video triggering.
To trigger on a specific line of video.
To use custom video trigger.
To Trigger on a Specific Line of Video
Video triggering requires greater than 1/2 division of sync amplitude with any analog
channel as the trigger source.
The example below set to trigger on field 2, line 124 using the NTSC video standard.
1. Press the
Setup
button on the front panel to enter the TRIGGER system function
menu.
2. Press the
Type
softkey; then use the
Universal Knob
to select Video and push down
the knob to confirm.
3. Press the
Source
softkey; turn the
Universal Knob
to select CH1 as the trigger
source, and press the knob to confirm.
4. Press the
Standard
softkey; turn the
Universal Knob
to select NTSC, and press the
knob to confirm.
5. Press the
Sync
softkey and set the option to
Select
; press the
Line
softkey and then
turn the universal to select
022
and push the knob to confirm; press the
Field
softkey
and then turn the
Universal Knob
to select
1
and push the knob to confirm.
Summary of Contents for SDS2000X-E Series
