SDS6000A Quick Start 3
General Safety Summary
Carefully read the following safety precautions to avoid any personal injury or damage
to the instrument and any products connected to it. To avoid potential hazards, please
use the instrument as specified.
Use Proper Power Cord
Only the power cord designed for the instrument and authorized by local government
regulations should be used.
Ground the Instrument
The instrument is grounded through the protective earth conductor of the power cord.
To avoid electric shock, please make certain the instrument is grounded correctly
before connecting its input or output terminals.
Connect the Signal Cable Correctly
The potential of the signal cable ground is equal to the earth ground. Do not connect
the signal wire to a high voltage.
Look Over All Terminals
’
Ratings
To avoid fire or electric shock, please look over all ratings and sign instructions of the
instrument. Before connecting the instrument, please read the manual carefully to
gain more information about the ratings.
Use Proper Overvoltage Protection
Make sure that no overvoltage (such as that caused by a thunderstorm) can reach the
product, or else the operator might be exposed to the danger of electrical shock.
Electrostatic Prevention
Operate in an electrostatic-protected area environment to avoid damages induced by
static discharge. Always ground both the internal and external conductors of the cable
to release a static charge before connecting.
Maintain Adequate Ventilation
