SPA-900 Series User Manual 73
instruments, not read by humans.
NOTE:
When you first recall trace files, the instrument will adjust the display parameters
(horizontal and vertical scaling, for example) to match the settings used during data collection.
The trace data will not change, even if you adjust the parameters.
3. COR(Correction)
COR files store the data used to mathematically adjust the displayed input signal based on
external factors (Cable loss, Amplifier/Antenna gain, etc.). They are saved in ASCII format,
which can be read by humans.
4. LIM(limit)
LIM files store the line or point data used to configure and display lines used for visual
indication of a user-defined limit. This is a binary file intended for use with SSA3X instruments
and is not readable by humans.
5. BMP(Bitmap)/JPG(JPEG)/PNG
Picture files capture the display of the instrument (screenshot) as an image file. All of the
details of the display are captured exactly. What you see on the display is in the file. These are
readable using image programs like Microsoft
®
Paint
®
.
6. CSV(Comma-Separated Variable)
CSV files store instrument configuration (scaling, units, etc..) and raw data (amplitude and
frequency values) in ASCII format, commonly viewed in spreadsheet programs like Microsoft
®
Excel
®
. This file type can be read by humans.
2.5.3.6
Create Folder
Create a new folder in current directory.
2.5.3.7
Delete
Delete selected file or directory.
2.5.3.8
Rename
Rename the selected file or folder.
2.5.3.9
Operate
Open/Load:
Open the selected folder or directory, Load the selected file.
Cut:
Cut the Selected file or folder, and delete the primary one after paste.
Copy:
Copy the Selected file or folder for paste.
Paste:
Paste the file cut or copied before into the current.
Delete:
Delete selected file or directory.
Distributed by: Reliant EMC LLC, +1 408 916
‐
5750, info@reliantemc.com, www.reliantemc.com
