SIG
L
ENT
SSA3000X Plus User Manual 9
Figure 1-10 Front Panel Connectors (2)
4.
TG SOURCE
The
TG SOURCE
can be connected to a device-under-test (DUT) through a cable with a male N-type
male connector.
CAUTION
To avoid damaging to the tracking generator, the reverse DC voltage cannot
exceed 50 V
5.
RF INPUT
The RF INPUT can be connected to the DUT through a cable with a male N-type connector
CAUTION
To avoid damaging to the instrument, the RF input signal must meet the
following: The DC voltage component and the maximum continuous power
of the AC (RF) signal component cannot exceed 50 V and +30 dBm
respectively.
