SIG
L
ENT
10 SSA3000X Plus User Manual
1.5 Rear Panel
Figure 1-11 Rear Panel
1.
Handle
Pull up the handle vertically for easy carrying of the instrument. When you do not need the handle,
press it down.
2.
USB Device Interface
The analyzer can serve as a “slave” device to connect external USB devices. Through this interface, a
PC can be connected to control the analyzer.
3.
LAN Interface
Through this interface, the analyzer can be connected to your local network (LAN) for remote control.
4.
REF IN 10 MHz
The analyzer can use the internal or an external reference source.
When a 10 MHz external clock signal is received through the
[10 MHz IN]
connector, this signal is
used as the external reference source and “
Ext Ref
” is displayed in the status bar of the user
interface. When the external reference is lost or not connected, the instrument switches to its
internal reference source automatically and “
Ext Ref
” on the screen disappears.
The
[10 MHz IN]
and
[10 MHz OUT]
connectors are usually used to build synchronization among
multiple instruments.
