SIG
L
ENT
SSA3000X Plus User Manual 11
5.
REF OUT 10 MHz
The analyzer can use the internal or an external reference source.
When an internal reference source is used, the
[10 MHz OUT]
connector can output a 10 MHz
clock signal generated by the analyzer. This signal can be used to synchronize other instruments.
The
[10 MHz OUT]
and
[10 MHz IN]
connectors are usually used to build synchronization among
multiple instruments.
6.
Trigger in
In external trigger mode, the analyzer will update the trace scan after the Trigger In connector receives
an external trigger signal that meets the trigger input specifications.
7.
Security Lock Hole
If needed, you can use a security lock(purchased separately) to lock the analyzer to a desired location.
8.
AC Power Supply
The analyzer accepts 100-240V, 50/60 or 100-120VA 400Hz power supply. Please use the power cord
provided as accessories to connect the instrument.
9.
Fuse
Before power on, make sure the analyzer is protected by the proper input fuse.
