SIG
L
ENT
62 SSA3000X Plus User Manual
2.4.2.8
Harmonics
Figure 2-19 Harmonics
Measurement Results:
each harmonic amplitude and total harmonic distortion of carrier signal. It can
measure up to 10th harmonic.
Measurement Parameter:
1.
Fundamental
Set the frequency of the fundamental wave.
If the automatic mode is turned on, the fundamental wave will be automatically found from the first scan.
If the automatic mode is turned off, the user can input the fundamental frequency manually.
2.
Freq Step
Set the harmonic step. In auto mode, the frequency of a harmonic is a multiple of the fundamental
frequency.
3.
Harmonic Num
Set the total number of the harmonics to be measured.
Table 2-43 Harmonic Num
Parameter
Explanation
Default
10
Range
2 ~ 10
Unit
None
Knob Step
1
Direction Key Step
1
