SIG
L
ENT
72 SSA3000X Plus User Manual
Chapter 4 System Settings
4.1 System
4.1.1 Language
The analyzer supports a multi-language menu, Chinese and English built-in help and popup messages.
Press this key to select the desired display language.
4.1.2 Power On/Preset
4.1.2.1
Power On
Set the power on setting to Default, Last or User.
Def:
Load the default settings, for more details please refer to Table 4-3.
Last:
When Last is selected, instrument settings before the last power-off are recalled
automatically at power on.
User:
If power on is set to user, the device will recall the specified configuration after power on.
4.1.2.2
Preset
Set the preset type to Default, Last or User.
Def:
When press
Preset
, load the default settings, for more details please refer to Table 4-3.
Last:
When press
Preset
, load the last power-off settings.
User:
When press
Preset
, load the specified configuration type.
4.1.2.3
User Config
Save the current instrument settings as user-defined setting into the internal non-volatile memory.
4.1.2.4
Factory Reset
When
Factory Reset
is selected, the device will recall the initial config.
4.1.2.5
Reset & Clear
When
Reset & Clear
is selected, the device will recall the initial config and all user data and settings
will be erased.
4.1.2.6
Power on Line
Set whether the instrument will start automatically after power-on. Default does not automatically start.
