SIGLENT SC1016, User Manual

SIGLENT Digital Multimeter SC1016 User’s Guide

WWW.SIGLENT.COM

4.Channel setup

Press the [Channel Setup] to enter the setup interface.

Table 2. Scanner Function Menu Description

Function Menu

Description

Channel Config

Open/close the channel and set the measurement function, measurement 

parameters of specified channel.

Low

Set the low value of scanned channel range.

High

Set the high value of scanned channel range.

Press the [Channel Setup] to enter the channel configuration interface and set the channel switch, function, range and speed..

The range setting is applicable for the following functions: DC/AC Voltage (DCV/ACV), 2/4 Wire Resistance (2W/4W), Capacitance (CAP), Frequency (FRQ).

Table 3. Available Range for different measurement function

Measurement Function

Available Range

DCV/ACV/ FRQ

Auto, 200mV, 2V, 20V, 200V

DCI/ACI

2A (fixed)

2W/4W

Auto, 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ(1MΩ for SDM3065X), 10MΩ, 100MΩ

CAP

Auto, 2nF, 20nF, 200nF, 2μF, 20μF, 200μF, 
10000μF (2mF, 20mF, 100mF for SDM3065X)

The scanner function provides two measurement speeds: Fast (50 reading/s) and Slow (5 reading/s). (Fast: 1PLC, Slow: 10 PLC for SDM3065X)

The speed setting is applicable for the following functions: DC/AC Voltage (DCV/ACV), 2/4 Wire Resistance (2W/4W)  

Operating instructions:

• Move the cursor to choose the wanted parameter by direction keys and the background color of cursor’s position turns to gray.

• Select the current item by pressing “OK” key and the background color of the selected item turns to green.

• Set the parameter by up and down direction keys.

• Press “OK” key again to store the setting of the selected item of which the background turns back to gray. Move the cursor and repeat the 

prior steps to set the next parameter.

• Press [Done] to save the current settings and return to the higher level menu. 

5.Channel range setting

Select [High] or [Low] and then input numerical value by direction keys.
Note: The upper limit value should be always bigger than the lower limit value.