SIG
L
ENT
10 SDM3055 Digital Multimeter
Diagram 2- 2 Range selection menus
Explanations:
1. When the input signal is beyond the current scope of the measurement
range, the Multimeter will show “overload”.
2. Range option will turn back to default setting “Auto” after restarting and
remote reset.
3. Users are suggested to select “Auto” range so as to protect the instrument
against damage and get exact data as much as possible when it’s hard to
predict the range of measurement.
4. For Dual-display Function, the measurement ranges of Main display and
vice display are similar and can’t be changed independently
5. The range is fixed during testing the Continuity and Diode. The range of
continuity is selected as 2kΩ, while the Diode is 2V.
6. Auto Range is not suitable for measuring current up to 10A. If the signal is
used to
I
Terminal, users need to choose range manually.
