SIG
L
ENT
100
SDS1000X User Manual
Math Operators
SDS1000X supports math count operation (Addition, subtraction, multiplication, division),
FFT (Fourier transform) operation and math function operation (differential, integral,
square root).
Addition or Subtraction
Math operators perform arithmetic operations add or subtract operation on any two analog
input channels. When you select addition or subtraction, the
Source A
and
Source B
values are added or subtracted point by point, and the result is displayed.
1. Press the
Math
button on the front panel to enter the MATH function menu.
2. Press the
Source A
and
Source B
softkey respectively, and then turn the
Universal
Knob
to select the source to do math operation. Analog channels (CH1 and CH2) and
reference waveforms (REFA and REFB) can be used as Source A or source B.
3. Press the
Operation
softkey and then turn the universal to select
+
or
-
to make
addition or subtraction operation. The resulting math waveform is displayed in white
and labeled with ―M‖.
4. If you want to invert the math waveform, press the
Invert
button and set the option to
On
to invert the display of the math waveform.
www.biall.com.pl
Summary of Contents for SDS1102X
