SIG
L
ENT
SDS1000X User Manual
53
Trigger Level
Trigger level and slope define the trigger point,
Positive Slope
Negative Slope
Trigger Level
Trigger Point Trigger Point
Input Signal
You can adjust the trigger level for a selected analog channel by turning the
Trigger Level
Knob
.
You can push the
Trigger Level Knob
to set the level to the waveform's 50% value
immediately. If AC coupling is used, pushing the
Trigger Level knob
sets the trigger level
to about 0 V.
The position of the trigger level for the analog channel is indicated by the trigger level icon
(If the analog channel is on) at the left side of the display. The value of the analog
channel trigger level is displayed in the upper- right corner of the display.
www.biall.com.pl
Summary of Contents for SDS1102X
