SIG
L
ENT
SDS1000X User Manual
117
To Clear Measurement Parameters
Press the
Clear
softkey to clear all the measurement parameters that are displaying on
the screen.
To Make All Measurement
All measurement could measure all the voltage, time and delay parameters of the current
measurement source and display the results on the screen.
Figure 66 All Parameters Measurement
Do the following steps to make all parameters measurement.
1. Press the
Measure
button on the front panel to enter the MEASURE function menu.
2. Press the
All Measure
softkey to select
On
.
3. Press the
Source
softkey to select the measure source (CH1, CH2, MATH, REFA,
REFB).
www.biall.com.pl
Summary of Contents for SDS1102X
