1.0 Overview
FOS-01 Operation Manual
Page 3 of 17
1.0 Overview
The Fiber Optic Switch (FiberSwitch
™
) is a revolutionary device that opens new fields of application for fiber
optics as well as introducing a new method of controlling electrical devices. It outperforms electrical switches
in many applications such as hazardous locations and remote control over long distances. It acts as a switch
which interrupts a fiber optic signal to indicate a button press or selection. The Fiber Optic Switch is
essentially an optical contact block which connects to a variety of existing operators, making it a perfectly
safe switch for hazardous areas.
The system provides a safe optical signal (rated inherently safe
Ex op is
), which can be used in any type of
hazardous environment or explosive atmosphere.
Features:
Absolutely safe for installation in
hazardous areas, as it eliminates the
ignition source.
Immune to EMI/RFI and high voltage
power lines.
Eliminates electrocution and fire hazards
Can be installed up to 2.5Km away from
equipment it controls.
Uses Standard Multimode 62.5/125µm
fiber optic cable with FC connectors.
Low overall installation cost as fiber optic
cable is less costly than copper cable.
Unique fail safe feature that opens its NC
contacts if the optical contact block
comes off the operator
Stackable optical contact blocks up to two
tiers.
Allows for multiple Fiber Optic Switches to
be daisy chained.
Fiber Optic Switches
FOS-01-xxx
Up to 2500m
Hazardous Area
Non-Hazardous Area
Fiber Optic Cable
62.5/125µm, MM
IP 52 (NEMA Type 12)
Enclosure
Fiber Optic Interface
FOI-01-221
