7.0 Ordering Number & Contents
FOS-01 Operation Manual
Page 16 of 17
7.0 Ordering Number & Contents
Catalog Number
* “Break-Before-Make" contacts. NC contact opens before NO contact closes.
** “Make-Before-Break" contacts. NO contact closes before NC contact closes.
*** Leave blank if choosing single optical contact block (ex. 1 optical contact block: FOS-01-121, 2 optical
contact blocks: FOS-01-2121)
! Operator to be specified from IDEC catalog. The adaptor plate must match the operator (ex. 22mm for TW
series, or 30mm for TWTD series)
Standard Contents
-
Fiber Optic Switch FOS-01-xxx
-
Hard copy of Datasheet
Accessories & Additional Contents
-
Fiber Optic Cable, MM Graded Fiber
:
62.5/125µm.
-
ST & FC connectors
-
Cable glands
FOS – 01 – x x(x) x
F
iber
O
ptic
S
witch
Series 01 (optical contact block c/w
2 optical contacts)
# of Optical Contact Blocks: 1
2
Optical Contact Types: 1 – NC/NC
2 – NO/NO
3 – NO/NC*
4 – NO/NC**
Adaptor Plate: 1 – for IDEC series TW 22mm
2 – for IDEC series TWTD 30mm
1st optical contact block
2nd optical contact block***
! Specify 1 number for single
contact block, 2 numbers for
double contact blocks
