54
www.sigmasport.com
4 OVERVIEW
4.2.1 ATTAChING ThE ChEST BELT
Press the R3 transmitter into the snaps of the chest
belt.
Important:
Detach the R3 transmitter from the belt
after training in order to save the battery. The trans-
mitter is always active if a current is flowing between
the two contacts. This is the case when the chest belt
is worn on the skin, or, for instance, if the chest strap
and/or the R3 transmitter lies on a wet towel. When
the LED flashes, the R3 transmitter is on.
Before you can train with your new RC 14.11,
you need to activate it. To do this, use the
appropriate tool to set the battery compartment
to ON.
Your RC 14.11 will automatically change to setting
mode. Use the PULSE (-) and SPEED (+) buttons
to scroll through the basic settings. Press the SET
button to confirm your entry. Set the basic settings
such as the language, measuring unit, date and time.
Press and hold the SET button to exit the
setting mode.
For further information, please see section 5 “Setting
mode”.
You can wear the R3 transmitter either on the chest belt or the HipClip.
k
Worn on chest belt
It measures the heart rate, speed and distance.
k
Worn on hipClip
It measures the speed and distance, but not the heart rate.
4.1 ACTIVATING ThE RUNNING COMPUTER
4.2 ATTAChING ThE R3 TRANSMITTER
