Operating Instructions_SD160BT
ex
_002
14
4.3 Using the base charging station for system assembly 2
(Use base charging station
in non hazardous area
)
Use power supply SDZ10.0016.00 to load the scanner with a non-
explosion-protected base charging station in a non-hazardous area.
This connection is closed ex-factory for a base
charging station for hazardous areas.
To connect the base charging station in a non-hazardous area, the
connection cable for the power supply and the PC is inserted in the
opening at the bottom of the base charging station. Use SD/10.0012
as a RS232 cable, and SDZ10.0013.00 as a USB cable.
If the cable has been inserted fully you can hear a
"click". Check that the cable fits firmly.
Place the SD160BT
es
handheld scanner onto the charging station.
Insert the lower part of the handle to ensure that the contacts for
charging are connected properly.
The LED at the head of the scanner will come on to
indicate successful charging.
