ETT 1962
TOUCH OPERATING PANEL
Page 10
18.05.2017
4.2
Status Displays
Two status LEDs are located on the front (one red and one green LED).
Run
green
ON
From activation of the voltage supply until processing of the auto-
exec.lsl
When the application is running (except when controlled through
application differently)
BLINKS
In the CLI, while processing the autoexec.lsl until the application is
running
OFF
When error occurs or reset
Can be set from the application (ON, BLINKING, OFF)
Error
red
BLINKS
When error occurs or reset
OFF
During start process
During RUN status (application running)
Can be set from the application (ON, BLINKING, OFF)
