27
SIGNAMAX LLC • www.signamax.eu
Ground wire
Live wire
Naught wire
Connecting power supply:
Step 1:
Switch off the power supply switch. Connect one side of
power
supply cable to the entry of back panel of router, and another side to
power supply jack (
AC:
220V 50Hz/60Hz.
DC:
-48V).
Step 2:
Switch on the power supply.
Step 3:
Check whether the power supply indicator front panel is on. If it
is not on, repeat step 1 and 2.
Grounding Connection
The grounding requirement of equipment with plastic chassis and
without grounding post:
Grounding mode should be in accordance with the united grounding
requirement of working place, protection place and anti-thunder
grounding.
Grounding cable section area: The grounding cable (section area is
according to maximum current load) should adopt (copper) lead, but
not naked lead. The united grounding resistance should be
＜
5Ω.
Good power supply grounding
Main Control Board Cable Connection
The section explains the method of connecting 065-1530 Signamax
Security Router control board cable to network including connecting
router console port.
Console Port Connection
The 065-1530 Signamax Security Router provides one EIA/TIA-232
async serial console port. Via this port, the user configures the
router by adopting RS-232 serial character terminal (normally it is a
PC).
