108Mbps SuperG Wireless PCI Adapter
4. The wireless client cannot access The Internet in The Infrastructure mode.
Make sure the wireless client is associated and joined with the correct Access Point. To
check this connection: Right-click on the
Networking Icon
in the taskbar and select
View
Available Wireless Networks
. The
Connect to Wireless Network
screen will appear.
Please make sure you have selected the correct available network, as shown in the
illustrations below.
Check that the
IP Address
assigned to the wireless card is within the same
IP Address
range
as the access point and gateway.
(For example: if one computer has an IP Address of
192.168.0.2, the other computers should have IP Addresses that are in the same range of
192.168.0.x where x is a number between 3 and 254. The subnet mask must be the same
for all the computers on the network.)
To check the
IP Address
assigned to the wireless
card, double-click on the
Network Connection Icon
in the taskbar and select the
Support
tab
and the
IP Address
will be displayed.
30
