电
⼒
线
POW+DATA
DATA
User Guide:
1. Check the PoE switch:
1. Please check the enclosure, the RJ-45 ports, and the
LED indicators, making sure they are ok.
2. Connect the PoE switch to AC power, making sure the
initialization of the PoE switch occurs as below:
•
POE indicator is off when power is connected.
•
POW indicator is on and remains on after
connection to AC power.
•
Other indicators will be on, then off after one or
two seconds.
2. Cable connection:
1. Connect the Switch to Computer or other PD (such as
an IP camera or wireless AP) by Cat. 5 or better cables.
2. Connect the external power cord to the Switch and the
power cord to AC plug
3. Turn on the switch
Caution:
1) All operation should be provided only by a qualified
service technician.
2) Make sure the PDs you connected to the Switch are
compliant with IEEE 802.3af or 802.3at.
3) Make sure the power is off before unplugging the AC
power.
4) Makes sure all PoE PDs power consumption is less
than total power
5) Please avoid any heavy thing placed on the Switch.
6) Do not use this product near water, for example, in a
wet basement or near a swimming pool.
7) Avoid using this product during an electrical storm.
There may be a remote risk of electric shock from
lightning.
8) For outdoor use, the Switch itself should be housed
inside a protective enclosure.
9) Cutting power during a firmware upgrade can damage
your device.
10) Only use attachments/accessories specified by the
manufacturer.
11) Opening the switch or tampering with the warranty
sticker can void your warranty.
