background image

Signamax

 065-7930 16-Port Gigabit Ethernet Switch

 

 

vii

Safety Instructions 

Use the following safety guidelines to ensure your own personal 
safety and to help protect your system from potential damage. 
Throughout this safety section, the caution icon  (       ) is used to 
indicate cautions and precautions that you need to review and 
follow. 

 

 

Safety Cautions 

 

To reduce the risk of bodily injury, electrical shock, fire, and 
damage to the equipment, observe the following precautions. 

 

Observe and follow service markings. Do not service any product 
except as explained in your system documentation. Opening or 
removing covers that are marked with the triangular symbol with a 
lightning bolt may expose you to an electrical shock. Only a trained 
service technician should service components inside these 
compartments. 

If any of the following conditions occur, unplug the product from 
the electrical outlet and replace the part or contact your trained 
service provider: 

– The power cable, extension cable, or plug is damaged. 

– An object has fallen into the product. 

– The product has been exposed to water. 

– The product has been dropped or damaged. 

– The product does not operate correctly when you follow 
the operating instructions. 

• 

Keep your system away from radiators and heat sources. 
Also, do not block cooling vents. 

Summary of Contents for 065-7930






























Reviews: